CDI-BEC, CDI Battery Eliminator, Gator-RC
Features:
-
Eliminates separate battery for Ignition modules.
-
Compatible with any receiver battery technology. (NiCad, NiMH, A123, LiPo, Li-Ion) Voltage input range (4.2v-16.0v)
-
Eliminates mechanical on/off switch for ignition modules. The ignition can be turned on/off with a transmitter channel.
-
Compatible with most CDI Ignition modules. Voltage output selectable (5.0v-8.0v).
-
Eight (8) voltage set ranges (5.0v, 5.4v, 5.8v, 6.3v, 6.7v, 7.1v, 7.8v, 8.0v).
-
State-of-the-art Filter section.
-
Advanced 2nd order Common Mode CLC Filter with Feedthrough Capacitors.
-
Low Pass/Low ESR capacitors Filter. Allow peak pulse current for the CDI module.
-
Optical Isolation from Receiver. Prevent any CDI noise from returning to the receiver.
-
Cross Talk elimination with twisted power Input and Output leads.
-
4-layer Circuit Board with solid ground planes for better noise suppression.
-
Auto Shut down on low receiver battery to prevent depleting receiver battery. (<4.10v for 10 seconds) Dead-stick is better than loss of control. (Selectable on/off)
-
Microprocessor signal processing of the receiver channel allows precise control of turn on and off.
-
Constant current LED driver output. LED brightness doesn’t change with Voltage output changes. 15mA Allows any LED to be used.
-
In-field replaceable 5MM LED. Green LED Standard.
-
Current state-of-the-art power supply control circuitry allows a wide input voltage range and wide voltage output range. It doesn’t require a receiver battery greater than the output voltage selected.
-
Heavy Duty 22Awg Input and Output lead allows low voltage drop at higher currents.
-
High-reliability SMD manufacturing allows for reduced weight and size.
-
Designed and manufactured in the USA, from foreign and domestic parts.
Specifications:
Weight - 20g
Dimensions - 27mm x 47mm x 8mm