F4U Goodyear FG-1D, 62cc - Limited Edition, Seagull Model

F4U Goodyear FG-1D wingspan 87", 62cc

The Seagull F4U is a giant-scale masterpiece for 60cc power plants that delivers scale details worthy of being called competition grade. Its scale outline, an impressive scale appearance. You also get scale details like a full-depth cockpit, hidden tail and flap control linkages, scale rib detail, scale 3-panel flaps, dummy radial engine, sliding canopy and so much more. The hardware package included is very high-quality and complete as possible no matter the power system you favor so you can get to flying this magnificent warbird quickly.

Specifications:

Wingspan : 221cm - 87 inches

Length: 164.6cm - 64.8 inches

Wing area: 91.7sq.dm - 1421 sq.in

Weight: 13.5kg - 30lbs

Engine: 60cc (Stinger 63SE works perfect.  DLE55RE and Saito 90 are great options too.)

Motor        :360/ 6000watt / ESC 160A-200A/ Lipo 12s /electric propeller 24x10-25x12

Radio        : 12 channels 12 servos

 

Key Features

• Superb flying characteristics, plus an accurate scale outline
• Convenient three-piece wing assembly and carbon fiber wing tube
• Fully Sheeted fuselage & Center Wing
• Pitot tube, guns, and leading-edge stall strip details
• Functional three-panel flaps deploy using internal linkages
• Sliding clear canopy with painted frame and magnetic closure
• Full-depth cockpit and instrument panel included (pilot not included)
• The fiberglass cowl features a panel line and cowl flap detail.
• Transparent Fuel tank all included.
• Radial dummy engine included
• Included 5-inch Rubber wheels, as well as aluminum, spoke wheels that set off this amazing model in an inspirational way.
• Ordinance pylons can be equipped with the optional E-flite serverless payload release mechanism
• Included Drop tanks, bombs, and navigation lights.
• Included Aluminum Spinner.
• Decals Included but not applied
• Also includes: aluminum wheels, servo trays, engine mount, fuel tank, and all hardware

***PLEASE NOTE  there will be a separate SLIGHTLY ENLARGED COWLING TO FIT THE Saito Engines FG-90R3 90cc 3-Cylinder Gasoline Radial Engine and the Stinger 70cc Twin Gas Engine for those customers who want to mount those engines fully cowled in *** Note Model in photos has a GP61 with a stock wide muffler. An EME 60 with AutoStart or Stinger Pro 63 with wrap-around mufflers will allow much more concealed fitting than the GP61 with a stock-wide muffler!

 Note the retracts are an accessory made by JP.

SEA361Gear

Unboxing of the F4U Goodyear:

 

 

 Note to builders of this model:

The CG is 120mm back from the L.E of the wing at the wing root is RIGHT.

In Manual tell CG is 145mm is mistake (Place a piece of masking tape on the top of each wing 120mm back from the leading edge at the wing root)