Ball Bearing Adjuster, 2mm / 2-56, 4 Pack, Gator-RC

Ball link with bearing 2mm perfect for 2mm and 2-56 threaded rods 2-56 threaded rods. Center bolt fits 2.0mm hole.

4 per pack

The shaft of the link measures 5.37 in diameter and can be drilled to fit any sized rod 4/40 or 3mm is not a problem.

Sold individually or as this in 4 packs This link is a perfect fit for 2/56 rods. The hole in the shaft measures 1.80mm a 2/56 threaded rod is 1.96mm.

Note:
When using these, the bearings must face the top. The 2mm screws head go up against the center ring of the bearing. There is a small plastic washer/spacer that sandwiches between the bearing and the servo arm. This is very important.

The 2mm screws are a perfect match to all of the Secraft servo arms that we sell.