Jeti Elite Falcon 85HV/SB 12S/15A Brushless ESC w/Telemetry With built in BEC

Jeti Elite Falcon 85HV/SB 12S/15A Brushless ESC w/Telemetry With built-in BEC w/Telemetry, Prop Positioning, Freewheeling (Jeti EX, HoTT, S.Bus2)

The brand new line of Elite Falcon Opto & SBEC ESCs targets mainly professionals and pilots looking for uncompromising precision and quality. The Elite Falcon ESCs combine new revolutionary design, system upgradability, and almost unlimited flexibility with state-of-the-art telemetry capabilities. Switching Magnet and Hall sensor switch included with every Elite Falcon SBEC ESC.

The Falcon product line represents advanced speed controllers for exclusive use in airplanes, drones, sailplanes, or any kind of radio control application. With integrated telemetry and various possibilities of optional user configuration, the controllers offer high efficiency, low weight, and precise motor control. The telemetry system in the Elite Falcon ESC lets you monitor in real-time the Amperage (Amp), Voltage (V), and Capacity (mAh) consumed from the battery, ESC even calculates the Power (W) output of the system. You can also measure the ESC Temperature and add external Motor Temperature and Propeller Positioning sensors. The Elite Falcon line of Brushless ESCs adds another revolutionary feature utilizing Backup Battery Integration. We have created a more robust hardware platform including increased cooling capability, smaller overall packaging, and selectable sensitivity to allow you to use any brushless motor that you choose. No matter which size you choose, the Elite Falcon series brushless speed controllers are right for your next project.

If using with Jeti R3/RSW Receiver Wireless Switch you have to change the setting of the ESC from "Hall" to "Electronic" in the ESC Common Setting menu.

Specifications and Features
- Supported Protocols: Jeti EX, M-LINK, Graupner HoTT, Futaba S.Bus/S.Bus2, Spektrum SRXL2 (w/Update)
- Over and under-voltage protection, over temperature protection, motor-stall protection
- True High Power switching BEC 15A Continuous/30A 2s Burst
- BEC over current and over temperature protection w/Telemetry
- Fully integrated receiver battery backup with LiPo or LiFe preselect
- Real-time telemetry data stream and min/max value data logging
- Configurable current limiter, safety shutdown when the throttle impulse is lost
- Configurable acceleration, timing, electromagnetic brake, prop positioning
- Firmware updates via USB interface

The USB programmability allows you to update the ESC to the latest firmware right from home using Jeti or Elite USB Adapter and your PC with MAV Manager. Fine-tuning your power system has never been easier.

Active Freewheeling (Active Motor Breaking)
A brand new feature of the speed controller that reduces heat generated by the ESC during a partial load operation. This mode is useful for 3D extreme and F3A precision aerobatic pilots who want not only fast acceleration but also rapid deceleration. The motor follows throttle stick input in both ways and the pilot feels more completely in control.

Current Limiter (Active Power Monitoring)
The current limiter is a part of safety controller features. It does not stop the motor but rather continuously monitors the immediate current consumption and adjusts the motor power. You can enable this feature, specify the maximum allowed current and the ESC will reduce the motor power immediately as soon as the current threshold is exceeded. After the current returns back to the safe level, the motor power is restored.

Receiver Backup Battery (Buffer Battery Integration)
In case you need a small buffer battery for covering voltage spikes of your RC system, you can specify the type of the battery in the Common Setting – Backup Battery Menu. After setting up the battery type it is necessary to remove all power supplies from the controller and reset the ESC.