JR Propo S8411 V2 2K Competition HV Servo

    JR Propo S8411 V2 2K Competition HV Servo

• Spec

  Stall torque: 26.5kgf･cm@8.4V 145 oz torque
  Speed: 0.12sec/60°@8.4V
  Weight: 68g
  MPU: 32bit
  Neutral: 1500μS
  Control frequency: XBUS 1kHz/PWM 333Hz
  [Application] General use (high spec)
  [Size] 35 ×19×39mm
  [Lead length] 300mm
  [Operating voltage] 4.5V-8.5V
  ■XBUS programmable
  ■Full metal gear
  ■Wide voltage
  ■Double ball bearing (φ12/φ10)
  ■Operating angle: 120°/180°
  ■Standby current: 0.1 A
  ■Current when locked: 2.4A

   

  New upper case with JR/Dee Force Aviation logo laser engraved on red anodized aluminum.

  The rigidity of the gearbox case has been dramatically improved, and by making the output side bearing 12φ, the specifications have been improved to fully transmit the power of the coreless motor to the output shaft.

  Furthermore, by reducing gear stress, the life of the servo will be dramatically extended.

   

  This servo takes a 6mm x 23 tooth servo arm.

  [About initial parameter value settings]
  The initial parameter values ​​of this product are set for 50cc class airplanes.
  If the rudder used is light, hunting is likely to occur, but
  please change the following items in the XBUS settings to the optimal values ​​that will prevent hunting.

   

  [XBUS setting items]
  ■HOLDING/Holding force: Max. +5
  ■DUMPING/Stopping characteristics: Max. +30
  ■BOOST/Minimum motor operation amount: Max. +100