E-Flite Power 90 Brushless Outrunner Motor 325 KV (EFLM4090A)

E-Flite Power 90 Brushless Outrunner Motor 325 KV (EFLM4090A)

Features

Equivalent to or surpassing the power of a 90-size, 2-stroke, glow engine for sport and scale airplanes weighing 8 to 13 lb (3.6 to 5.9 kg)
Ideal for 3D airplanes weighing up to 10 lb (4.5 kg)
Ideal for models requiring up to 1800 watts of power
High torque, direct drive alternative to in-runner brushless motors
External rotor design for better cooling
High-quality construction with ball bearings and hardened 6mm steel shaft
Includes mount and mounting hardware with two 10mm prop shaft adapters tapped out for 8-32 threads
Slotted 14-pole outrunner design

Overview

Designed to deliver clean and quiet power equivalent to or surpassing the power of a 90-size 2-stroke glow engine for sport and scale airplanes weighing 8 to 13 pounds (3.6 to 5.9 kg), 3D airplanes up to 10 pounds (4.5 kg), or models requiring up to 1800 watts of power. It will provide excellent 3D performance for the Hangar 9 Frenzy 100 ARF, ShowTime 4D 90 ARF, Funtana X 100 ARF and other similar class models. The Power 90 also provides great power and performance for the Seagull Ultimate Bi-Plane 90 ARFs.

Tech Notes:

Maximum operating temperature: 220 degrees Fahrenheit.

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

You will need...

6S–8S Li-Po or 18-26 Ni-MH /Ni-Cd

16x8 to 18x8 electric props

80A High Voltage Brushless ESC
Like the Castle Talon 90 ESC

Specifications:

Type: Brushless outrunner motor
Size: Equivalent to or surpassing the power of a 90-size 2-stroke glow engine
Bearings or Bushings: One 6 x 19 x 6mm Bearing, and One 6 x 15 x 5mm Bearing
Wire Gauge: 13
Recommended Prop Range: 16x8 to 18x8
Voltage: 21.6–31.2V
RPM/Volt (Kv): 325Kv
Resistance (Ri): .02 ohms
Idle Current (Io): 2.00A @ 10V
Continuous Current: 50A
Maximum Burst Current: 65A (15 sec.)
Cells: 6S–8S Li-Po or 18–26 Ni-MH/Ni-Cd
Speed Control: 80A High 8S Voltage Brushless
Weight: 450 g (15.8 oz)
Overall Diameter: 56mm (2.20 in)
Shaft Diameter: 6mm (.24 in) (Includes two 10mm threaded prop shaft adapters with 1.5 pitch)
Overall Length: 52mm (2.00 in)