Mini Avanti Jet, Yellow/Silver (ARF), SebArt
SebArt Mini Avant Jet ARF (Yellow/Silver) with factory-installed electric retract landing gear
30-45 Turbine OR 90mm EDF Power
Details
SebArt Mini Avanti Jet ARF (Yellow/Silver)
Specifications
Wingspan: 53.5 in (1360 mm)
Length: 55.9 in (1420 mm)
Wing Surface: 589 sq in. (38 dm2)
Weight (EDF Version): 6.3 lb (2.9kg) (without battery)
Flying Weight (EDF version): approx. 8.3lb (3.8kg) with battery)
Weight (Turbine Version): 6.7 lb (3.05kg) (empty tank and no turbine battery)
Flying Weight (Turbine version): approx. 8.3lb (3.75kg) with battery + fuel tank)
Power
- 30-45 Turbine (KingTeach 45 or Zicoy 45 recommended)
- 90mm EDF
Radio
- 6 channels (plus)
- 7 mini servos
- (2) alerions, (2) flap, (1) rudder, (2) elevator
Features
- Painted fiberglass fuselage
- Wings and stabilizers in balsa covered with Oracover
- Suitable for 30-45 turbine with the "Turbine Conversion Kit"
- Pre-installed electric retracts, gear doors and their 3 corresponding servos and sequencer
Requires
- 1x 90mm EDF plus 1 ESC
- or a 30-45 turbine with conversion kit
- Minimum 6 channels radio and receiver
- 7 mini servos (1x rudder, 2x elevator, 2x ailerons, 2x flaps)
- 5000-5800 mAh 35-50c Lipo Battery (8 to 10s)
- Lipo Battery Charger
- Estimated build time is 10 hours
- Note these models have been upgraded to have all Wide Voltage servos and retracts.
ATTENTION: The factory-installed electric retracts, nose gear door servos and steering servo can NOT be powered by more than 6.0V.
If you intend to use HV servos for the control surfaces and use a 2S 7.4V LiPo pack, a voltage regulator will be required to prevent damage to the sequencer.
Check out @JustPlaneCrazy unbox his new Mini Avanti! Be sure to also check out his three part build series on this jet!!
We Recommend
More Information
SKU | SEBA295YS |
---|---|
Brand | Sebart |
Manufacturer | Sebart |