SIAI-Marchetti SF-260TP S, 50E, Red, SebArt

SIAI-Marchetti SF-260TP S, 50E, Red, SebArt

The SIAI-Marchetti SF260TP S 50E ARF scale, was designed by the 15 times Italian Champion Sebastiano Silvestri, vice-European Champion and 2 time F.A.I World Cup winner F3A. This professional ARF kit is the result of Sebastiano’s long research, experience in F3A and his passion for scale planes. This combined with an extremely light weight structure and with many small aerodynamical tricks give the SF260TP S 50E an impressive precision and easy control at any airspeed and flight condition.

The SF260TP S 50E can do it all… it can start and land very easy on grass surface and with the factory installed electric retractable landing gear, light system, flaps, looks very scale on ground and in the air.
The SF260TP S 50E is ready for any pattern maneuvers as for unbelievable easy rolls, knife-edge pass, loops, spins, stall turn... and almost anything else you can dream up from a scale plane are waiting you.

Specifications:
Wing Span:………………...……............................168 cm/66"
Length:….......…….……………..........................…167 cm/65"
Wing Area:……....................................................51.6 dm2
Weight:…………………….…….3.800g. RTF less battery
Radio:....................................6-7 Channel, 4 standard servo

Recommended power set up:

Motor:....................................................... Hacker A50-16S
ESC:…......................................Hacker Master Basic 70 SB
Propeller: …..........................….…....................APC 17x8E
Battery: ….........................................…4500-6S or 5000-6S

Required radio, motor and battery Radio equipment:
• Minimum 6-7channel radio system
• 4 standard servos for ailerons, elevator and rudder
• 2 servo extension 400mm for elevator and rudder servos
• 2 servo extension 200mm for aileron servos

Recommended electric motor for best performance:
• Hacker A50-16S + X70 SBec-Pro controller + APC 17x8E
or
• Hacker A50-16S + MASTER BASIC 90 OPTO controller + APC 17x10E**
Recommended Li-Po battery pack for best performance:
• 4500mAh 6S or 5000mAh 6S
** NOTE: this option need an extra 2S lipo battery of 900mha and a volt regulator
switch for the receiver (with light system connected to receiver)