Mini Albatros L-39 Jet, Solvakia-Air Force(ARF), SebArt

Mini Albatros L-39 Jet, Solvakia-Air Force (ARF), SebArt

Power

• 30-45 Turbine (KingTech 45 or a Zicoy 45 recommended)
• 90mm EDF

Radio

• 6 channels (plus)
• 7 mini servos
• (2) alerions, (2) flap, (1) rudder, (2) elevator

Specifications
Wingspan: 47.8 in (1215 mm) 
Length: 57.5 in (1460 mm) 
Wing Surface: 480 sq in. (31 dm2)
Weight (EDF Version): 6.7 lb (3.04kg) (without battery)
Flying Weight (EDF version): approx. 8.55lb (3.8kg) with battery) 
Weight (Turbine Version): 7.19 lb (3.26kg) (empty tank and no turbine battery)

Features

• Painted fiberglass fuselage
• Wings and stabilizers in balsa covered with Oracover
• Suitable for 30-45 turbine with the "Turbine Conversion Kit"
• Pre-installed electric retracts, gear doors and their 3 corresponding servos and sequencer

Requires

• 1x 90mm EDF plus 1 ESC
• or a 30-45 turbine with conversion kit
• Minimum 6 channels radio and receiver
• 7 mini servos (1x rudder, 2x elevator, 2x ailerons, 2x flaps)
• 5000-5800 mAh 35-50c Lipo Battery (8 to 10s)
• Lipo Battery Charger
• Estimated build time is 16 hours
• Note these models have been upgraded to have all Wide Voltage servos and retracts.

ATTENTION: The factory-installed electric retracts, nose gear door servos and steering servo can NOT be powered by more than 6.0V.
If you intend to use HV servos for the control surfaces and use a 2S 7.4V LiPo pack, a voltage regulator will be required to prevent damage to the sequencer.