Control Horn, 34mm Adjustable Base w/ Clevis (Gator)
Gator-RC 34mm (1-5/16th inches) Aluminum Control Horn with Bearing Clevis
34mm Aluminum Control Horn with Bearing Clevis
Aluminum Control Horn with Bearing Clevis (each)
The size of the control rod that fits into the end of the clevis is 4/40 or 2.5mm.
It has enough material to be drilled to fit up to a 3mm rod. The hole measures 2.05mm.
The horn length is 34mm
Hardware that passes thru the bearing are all 2mm
- 2 x 10mm screw with locking nut and a 2mm plastic bearing to stop the side of the clevis from rubbing against the side of the inside clevis
- 3mm x 30mm flat head screw is what secures the horn and passes thru the hard point on the control surface.
- A 3mm x 12mm countersunk washer is also included.
- Total weight of all 8 pieces is 4.8 grams