Ball Bearing Adjuster, 2.5mm / 4-40, Gator-RC
Ball Joint Head Link Rod with Screw and Bearing for RC Airplane, Model Car, Buggy, Boat Crawler (Previous SKU FH5002)
Gator-RC Ball link with bearing for 2.5mm and 4-40 threaded rods or turnbuckles. Center screw fits 2.0mm hole.
Sold one each pack
The shaft of the link measures 5.37 in diameter and can be drilled to fit any sized rod 4/40 or 3mm is not a problem.
When using these the bearings must face the top. The 2mm screws head go up against the center ring of the bearing. There is a small plastic washer/spacer that sandwiches between the bearing and the servo arm. This is very important.
The 2mm screws are a perfect match to all of the Secraft servo arms that we sell