Ball Bearing Adjuster, 2.8mm, Gator-RC
Lever Steering Linkage Tie Rod End Ball Head End with Screws and Nut (Previous SKU FH5008)
Ball Bearing Adjuster 2.8mm (FH5008) works with 4-40 0r 3mm threaded turnbuckles Perfect matchup for the 3mm or 4-40 Secraft Turnbuckles or any threaded rod in this size,
Sold one each pack
Ball link with bearing with 2.8mm hole for 4-40 to 3mm threaded rods or turnbuckles.
The shaft of the link measures 5.37 in diameter and can be drilled to fit any sized rod 4/40 or 3mm is not a problem.
When using these the bearings must face the top. The 2mm screws head goes up against the center ring of the bearing. There is a small plastic washer/spacer that sandwiches between the bearing and the servo arm. This is very important.
The 2mm screws are a perfect match to all of the Secraft servo arms that we sell.