Clevis, Ball Bearing w/ Flag Attachment, Gator-RC

Ball Bearing Clevis with Flag Attachment for Control Horn

As pictured this is a Ball bearing linkage with the Flag connection part that attaches to a threaded control horn/rod.

Does not include the turnbuckle or the aluminum horn shown in one of the pictures.

The clevis end fits from a 2 to 3mm thread and the flag portion that fits onto the threaded control horn fits a 2.6mm to 4mm thread.

Overall weight of the 5 pieces is 1.6 grams

The screw that goes thru the Ball Bearings inside is 2mm x 12mm comes with a nut and a plastic bushing that fits against the inner race of the bearing.

Totally free of any binding and 100% slop free this is a very high-quality piece of hardware.