Futaba BLS173SV (S.Bus2/Brushless) W/Attached lead Servo

This is the Futaba BLS173SV (S.Bus2/Brushless) W/Attached lead High Voltage, brushless SBus 2 Mini Servo.

This is a perfect choice for the elevator positions in a 2-meter Pattern plane and also the ailerons on a 2-meter Biplane.

FEATURES: Designed for airplane, glider, and EP helicopter applications.

Brushless motor

One-year limited warranty through the Futaba USA Service Center beginning at date of purchase

SPEED: 0.11 sec/60°at 6.6V 0.10 sec/60° at 7.4V

TORQUE: 6.8 kgf/cm at 6.6V 94.5 oz/in at 6.6V 7.6 kgf/cm at 7.4V 105.6 oz/in at 7.4V

This servo works fine at 8.4 volts if needed.

SIZE: 33 mm x 15 mm x 27.1 mm 1.3 in x 0.59 in x 1.07 in

WEIGHT: 28 g 0.99 oz

POWER SUPPLY: DC 6.0V-7.4V

SBus Programmable Defaults Dead Band

Degree: 0.36 Damper

Factor: 112 Stretcher

Gain: 5

Boost: 10 Neutral Offset

Degree: 0

Travel Adjust Percentage: 100

Reverse (NormalReverse): Nor Stop Mode (FreeHold): Hold Buzzer (OnOff): Off Smoother (OnOff): On Boost (OnOff): Off Soft Start: 3.0