Free shipping
Free for orders over $99 In the USA (excluding planes)
Hitec HSB-9380TH Standard Digital Ultra Torque Brushless Titanium Gear Servo
$189.95
In stock
Only 1 left
SKU
HRC39383
Hitec HSB-9380TH Standard Digital Ultra Torque Brushless Titanium Gear Servo
Product Details
Note this servo uses the Standard DeFacto 25 tooth Futaba style servo arms sold here
Key Features
- Ideal for large planes, 1/8-1/5 scale on and off-road vehicles
- Titanium gears with dual ball bearings
- High performance, a brushless motor designed by Steve Neu
- Programmable features include, Fail Safe On/Off and Position, Direction, EPA, Speed (Slower), Dead Band, and Soft Start (downloadable software and DPC-10 PC Interface required)
- Ultra-hard gear shaft with three axial metal bushings
- Water and dust resistant
- Diamond cut aluminum center heatsink, red in color
- Metal/Plastic/duralumin hybrid first gear prevents electrical noise from affecting other components in the aircraft or vehicle
- PAD (Power Absorbing Device) prevents backflow of current when voltage regulators or receivers when voltage regulators are used
- Two years limited warranty through Hitec beginning at date of purchase
In The Box
- HSB-9380TH Servo with PAD (Power Absorbing Device)
- Instruction sheet
- Extra 3x8mm Servo Horn Screw
- Mounting Hardware
- 0.95" (23mm) Single Arm Horn, 1.2" (32mm) Single Arm Horn, 1.4" (36mm) diameter Round Horn, 1.5" (38mm) 4-Point Horn, 1.7" (44mm) Double Arm Horn, 2.8" (72mm) Double Arm Horn, 4.3" (110mm) Double Arm Horn
HS-9380TH Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 6.0V ~ 7.4V |
| Speed (Second @ 60°) | 0.17 ~ 0.14 |
| Maximum Torque Range oz. / in. | 472 |
| Maximum Torque Range kg. / cm. | 34 |
| Current Draw at Idle | 27 mA |
| No Load Operating Current Draw | 250 mA |
| Stall Current Draw | 2,100 mA |
| Dead Band Width | 1 µs |
| Physical Specifications | |
| Dimensions (Inches) | 1.57 x 0.79 x 1.50 |
| Dimensions (Metric) | 40.0 x 20.0 x 38.0 |
| Weight (Ounces) | 2.4 |
| Weight (Gram) | 68.0 |
| Circuit Type | EBL Digital |
| Motor Type | Brushless |
| Gear Material | Titanium |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | H25T |
| Case Material | Plastic / Aluminum |
| Dust / Water Resistance | Splash Proof |
| Connector Gauge (AWG) / Strand Count | 20 / 80 |
| Radio Control Applications | |
| Park flyer | N / A |
| Sport Plane | > 40% |
| Sailplane | 2 meters and up |
| 3D Performance | > 40% |
| Scale | > 40% |
| Electric Helicopter | N / A |
| Gas Helicopter | N / A |
| On-Road | N / A |
| Monster Truck | 1/8th |
| Buggies | 1/8th |
| Truggies | 1/8th |
| Short Course / Truck | 1/8th |
| Crawlers | N / A |
| Sail Boat | = >1M & Scale |
| Power Boat | 1/10th |
| SKU | HRC39383 |
|---|---|
| Brand | Hitec |
| Manufacturer | Hitec RCD |
Validate your login