Servo Arm, Carbon Fiber, 50mm, Small with Screws (Gator)

Servo Arm, Carbon Fiber, 50mm, Small with Hardware(Gator)

Improve your control surface response with Carbon fiber servo arm extensions!
Carbon fiber servo arms are stiffer than standard plastic arms, and can be installed over the top of your existing plastic control arms, improving the stiffness and throw of your standard servo arm.
Great for large scale planes with bigger control surfaces.

Length from center of output spline to first and longest hole is 50mm / 1.95" Inside holes drilled at 45mm, 40mm and 35MM.
Width: 21mm / .943"
Thickness: 2mm
Weight 3 grams/.105 of an ounce
Hole sizes are 1.5mm (You drill to what's needed.

For the sturdiest setup attach these to our Gator-RC 9mm Aluminum Round Servo Arms