Swiwin SW170B Turbine engine (Special Order)

SW170B parameter

Diameter: 109.4 mm

Length: 258 mm Total weight: 1,450 grams

Maximum speed: 113000 RPM

Idle speed: 36000 RPM

Thrust: 17 kg (ambient temperature 15 ℃)

Rated exhaust temperature: 700 c Maximum throttle fuel consumption: 480 g/min

Fuel: kerosene or diesel Lubricants: 5% Mobil pegasus ii

Regular maintenance cycle: 25 hours

Swiwin SW170B Turbine Engine.

Version 3 ECU.

This engine has incredible power, reliability, and economy.

Manufactured with the highest quality materials.

Swiwin assembles each and every turbine by hand with precision and care.

Swiwin has made improvements month after month to develop a very competitive product.

etail.

This engine features a brushless starter and fuel pump.

Additionally, the engine has an integrated FOD guard to protect the compressor from ingested foreign materials (such as debris, grass, rocks, etc).

Version 3 ECU FADEC features a single channel 32-bit high-speed processor chip and is software upgradeable. This ECU is now fully capable of telemetry.

Featuring faster throttle response, auto-restart flameout protection, multiple engine protections, and data storage playback functions.

Includes a color screen GSU to view, make changes, and monitor your engine's performance and data.

Every engine is inspected and tested prior to leaving the factory.

Specifications:

Package Includes: SW160B ECU Fadec GSU (Ground Service Unit) Fuel Pump (Brushless) Fuel Valve Festo Fitting Inline Fuel filter 4mm Fuel Line Turbine to ECU Cable Power Cable

Note: Warranty service is handled by CRX Turbines here in the USA.

Knowledgeable and committed staff Local US Based service Fast turn around (usually 2 - 3 days) Weekend and evening support Proven performance 100% committed to turbines First Year Warranty First-year warranty coverage begins the day you receive your motor.

1st-year warranty is stem to stern with the exception of exclusions which are covered in our manual.

Examples of non-covered damage are crashes, water damage (flood), FOD, Damage, etc.

SWIWIN/CRX Turbines Limited Lifetime Warranty CRX covers most internal turbine parts for the life of the motor. For a list of parts covered under the limited lifetime warranty, please refer to our manual.

First Year Warranty

First-year warranty coverage begins the day you receive your motor.  1st-year warranty is stem to stern with the exception of exclusions which are covered in our manual.  Examples of non-covered damage are crashes, water damage (flood), FOD, Damage, etc.

SWIWIN/CRX 25 hour service (with warranty or maintenance)

In order to maintain lifetime coverage, please maintain 25-hour service intervals. The cost of the service is $300.00.  During this service, the motor is examined for any sign of wear.  Bearings are changed and the unit is re-balanced.  Any needed, warranted parts are replaced with the service.  For items not covered under warranty, the owner will be contacted before any work is commenced in order to discuss any estimated costs.    Please refer to our manual for more warranty and service interval details and exclusions. 

Motors that are not maintained at regular 25-hour maintenance will be serviced at standard CRX Time and Materials rates.

Optional Replacement of Glowplug - A glow plug is equivalent to a light bulb.  We know that sooner or later that the plug will begin to fail and will later burn out.  Unfortunately, a glow plug requires more work to get to and to re-balance the engine than does a bearing change so it is recommended to change the glow-plug at the time of service.  Talk to us about having your glow plug changed when your motor is in for service.
​
Exclusions to Warranty

Warranty and/or extended coverage does not apply under the following circumstances:
​

1. The turbine is used for commercial or institutional (school) use
2. The turbine was submerged in water
3. The turbine has been modified in any fashion, i.e., mechanical or electrical
4. Any attempt to repair
5. Any dismantling of the turbine
6. Any crash regardless of the cause
7. The turbine was not cooled properly
8. Improper electrical connections
9. The Turbine serial number has been removed or altered.
10. The turbine is found to have been operated with 2 cycle oil