ZAP CA, Thick Viscosity, 1 oz. #PT-20
Zap Adhesives Slo Zap CA- 1 oz (PT-20)
Very High Viscosity
Super Thick & Super Strong
Allows Partial Positioning for Approximately 30 to 40 Second
Use ZAP Kicker to Accelerate Cure Time
ZAP Thick CA Adhesive
Thick and strong for high-stress areas. Works well on hard woods such as Maple and Oak. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas. Allows 30 seconds for positioning and cures in 60 seconds or less. To accelerate cure time use Zip Kicker.
This glue is SLOW but STRONG!! Use it on harder types of wood. For maximum strength let SLO-ZAP cure on its own, best accomplished by providing some light to medium clamping pressure on the pieces to be joined. SLO-ZAP will set up faster when sprayed with kicker, the outside will cure immediately but still allow about 30 seconds to allow the inside to fully cure. To speed the cure time and still have a few seconds of positioning, spray ZIP KICKER on one part, let dry, apply SLO-ZAP to the other, then join the two parts. When fixing furniture joints, separate the parts if possible, treat the tenon or rung with ZIP KICKER, making sure not to get any on the other part, let the kicker dry, put SLO ZAP in the mating part and join the two together. When using on fiberglass cloth or fabric spread it across the material with an old playing card, business card, or a soft plastic spreader. For critical applications test sample joints for designed strength requirements.