Free shipping
Free for orders over $99 In the USA (excluding planes)
Ball link with bearing for 2.5mm and 4-40 threaded rods or turnbuckles.
Center screw fits 2.0mm hole.
Can be drilled for larger threads.
(Previous SKU FH5011)
Ball link with bearing for 2.5mm and 4-40 threaded rods or turnbuckles. Center screw fits 2.0mm hole.
4 per pack
The shaft of the link measures 5.37 in diameter and can be drilled to fit any sized rod 4/40 or 3mm is not a problem.
Note:
When using these the bearings must face the top. The 2mm screws head go up against the center ring of the bearing. There is a small plastic washer/spacer that sandwiches between the bearing and the servo arm. This is very important.
The 2mm screws are a perfect match to all of the Secraft servo arms that we sell
SKU | GRC-BL-722 |
---|---|
Brand | Gator-RC |
Manufacturer | Gator-RC |
Validate your login